Thrust Washer

From Honda CX and GL Wiki
Revision as of 10:57, 11 November 2017 by JC (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Washer measurements with photos


Another measurement:


OK, here`s the definitive answer to that pesky thrust washer question that keeps on popping up on this forum.

OD: 17.4 mm ID: 12.3 mm Thickness: 0.95 mm

One on the gearchange shaft, one each side of the starter reduction gear shaft.

Thanks, Eurovee

Retrieved from ‘https://motovillage.org/wiki/hondacxgl/index.php?title=Thrust_Washer&oldid=146’

This site is backed by Number 85, who provide the hosting. If you need a website done, get in touch with them.