Link dump

Joe's bike

• http://cx500forum.com/forum/general-discussion/31025-out-sight-out-mind.html#post350849

GL700 info

• http://www.aegeansoft.com/silverwing/phorum/read.php?12,3131

Camshaft pitting/wear in oil seal area

• Install oil seal 50 thou further in to reach non-worn ground - won't block weep hole that far in
• Clean with carb cleaner, fill with JB weld, sand back smooth

Book on motorcycle design

• http://www.caferacer.net/forum/tips-tricks/24051-reference-material.html

VM34 tuning

• http://www.iwt.com.au/mikunicarb.htm

Mikuni BDST rebuild

• http://www.litetek.co/Guide_MikuniBDST_Rebuild.html

Header basics

• http://www.hotrod.com/articles/header-basics/